Electrical Systems Company, Is a Distribution Board the Same Thing as Panelboards?
When you hear someone speak of panelboards they are most likely speaking of a distribution board for electrical currents coming into a structure. When the current of electricity enters your home or business one of these units is there to dispense the proper amount of juice to exactly where it needs to go in the home. This is all done using fuses and breakers to connect the circuits and control the allotted amounts each circuit receives. An electrical systems company can help you understand the differences between these components.
Electrical Systems Company Panelboards
The Panelboards are made up of many different breakers in many different sizes. Depending on what will be operated off of the power supplied through a breaker they are either designed to operate things that run off of 110v or 220v. The different items functioning off of the 110v circuits in the home will also require differing amounts so the breakers in this distribution center will be different sizes accordingly.
The breakers in the Panelboards are designed to trip or flip when they sense a problem or fault in the current that is coming through them. Fuses can also be in these distribution centers but the fuses are designed for one time usage and the breakers are designed to trip alerting you of the problem and then are turned back on when the problem is corrected.
Electrical Systems Company Distribution Centers
Most of these electrical systems company distribution centers also have one breaker that is the main breaker and it can shut the power off to all of the devices in the panel. Some people refer to these items as the breaker box, or fuse box. All homes and businesses have some version of these items so that the electricity can be shut off to the different components when it needs to be. The average American home has a 200 amp service box.
These breaker boxes can be very dangerous and you can be injured or even killed if you fool around with these items and do not know what you are doing. These devices should be worked on by trained professionals so that the person doing the work is safe and all of the things attached to the device is safe. One of these items causes a fire in a home or business every day in the United States.
The dangers that these devices pose to the structure they are in are generally in the form of fire. Sometimes the breakers will fail or have a power surge through them that can damage appliances but not set them on fire. It is important that you know where your breaker box is located and that you know which of the components operate what parts of the home.
If you are familiar with the location of the different circuits within the box you can shut the power off to the washer, or to the stove, when you have to have these appliances repaired or replaced. You can also see when a breaker trips frequently what is on the circuit that could be pulling too much juice. The tripping may be an indication that one of your appliances has a short in it.
